◆ Euro gauge Electrical contact type diaphragm pressure gauge ◆
● Model : P571-P572
● Service intended :
P570 series are equipped with a specially designed dry-type diaphragm, and also equipped with the electrical contact block which allows all the combinations of contact to be used. The contact block is mounted on the dial, and the window is fitted with a knob for the external adjustment or the set point.
● Nominal diameter : 100 and 160mm
● Accuracy : ±1.0% of full scale
● Scale range (MPa, kPa, bar) :
- Flange 150 mm : 0 ~ 1 kPa to 0 ~ 40 kPa
- Flange 100 mm : 0 ~ 50 kPa to 0 ~ 2.5 MPa
● Working pressure :
- Steady : Full scale value
- Fluctuating : 90% of full scale value
● Working temperature :
- Ambient : -20 ~ 65 °C
- Fluid : Max. 100°C
● Degree of protection : EN60529/IEC529/IP67
● Temperature effect :
Accuracy at temperature above and below the reference temperature (20℃) will be effected by approximately ±0.4% per 10℃ of full scale
● Upper flange (Gauge side) : 304SS, 316SS
● Diaphragm :
- ≤40 kPa Stainless steel (316Ti SS)
- >40 kPa Duratherm 600
● Pressure connection and under flange : 304SS, 316SS and 316L SS
● Case : Stainless steel (304SS)
● Cover : Stainless steel (304SS), Bayonet type
● Window :
- 100 mm only : Safety glass
- 100 and 160 mm : Polycarbonate
● Movement : Stainless steel
● Dial : White aluminium with black graduations
● Pointer : Black painted aluminium alloy
● Conduit connection : M20 x 1.5
|
